알림
뒤로

JOURNALS


International Journals


2024

56. Chulwoo Im,Jung-In Kim,Inhan Kim and Jungho Yu " Comparison of OSC (Off-Site Construction) Level Measurement Methods" Construction Management, and Computers & Digitization, A special issue of Buildings  MDPI, SCIE Vol 14, No 5, Published: 5 June 2024,Pages 497–508


55. Inhan Kim , Jihye Shin , Syed Haseeb Shah and Saddiq Ur Rehman " Client-centered detached modular housing: natural language processing-enabled design recommender system"  JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING(P-ISSN:2288-4300) OXFORD UNIV PRESS ,SCIE Vol 11, No 3, Published: 23 May 2024, Pages 137–157 


2023

54. Myungho Han, Jin Suck Park, Hwang Yi , Inhan Kim " Microalgae Photobioreactor System for Indoor Air Remediation: Empirical examination on the CO2 absorption performance of Spirulina maxima in NaHCO3-reduced medium" Submitted to section: Green Sustainable Science and Technology,  Appl. Sci. 2023, 13(24), 12991; MDPI, Published: 5 December 2023


53. Saddiq Ur Rehman, Inhan Kim, Jungsik Choi, "Data-driven integration framework for 4D BIM simulation in modular construction: A case study approach" JCDE(Journal of Computational Design and Engineering), Volume 10, Issue 6, December 2023, Pages 2288–2311


52. Xingbin Chen, Sining Li, Gengying Li, Bin Xue, Bingsheng Liu, Yuan Fang, JoonOh Seo, Inhan Kim, Jung In Kim, "Effects of building information modeling prior knowledge on applying virtual reality in construction education: lessons from a comparison study, Journal of Computational Design and Engineering, Volume 10, Issue 5, October 2023, Pages 2036–2048


51. Kyung-Eun Hwang , Inhan Kim, Jung In Kim ,  Seung Hyun Cha  "Client-engaged collaborative pre-design framework for modular housing" Journals & Books Automation in Construction Volume 156, December 2023, 105123 ISSN: 1392-3730

2022

50. Kyung-Eun Hwang, Jungin Kim, Inhan Kim, "Differential evolutionary cuckoo-search-integrated tabu- adaptive pattern search (DECS-TAPS): A novel multi- hybrid variant of swarm intelligence and evolutionary algorithm in architectural design optimization and automation" JCDE(Journal of Computational Design and Engineering), SCIE Vol 9, No 5, pp.2103-2133


49. Hongwei Sun, Inhan Kim, “AUTOMATED CHECKING SYSTEM FOR MODULAR BIM OBJECTS” Journal of Civil Engineering and Management, 

SCIE Vol 28, pp. 554-563

48. Kyung-Eun Hwang, Inhan Kim, "Post-COVID-19 Modular Building Review on Problem Seeking Framework: Function, Form, Economy, and Time" Journal of Computational Design and Engineering, Oxford University Press, SCIE Vol 8, No 1 pp.1-93

47. Inhan Kim, Jung In Kim, "Special Issue on BIM and Its Integration with Emerging Technologies"Applied Sciences / MDPI , Appl. Sci. 2022. 12,  pp.5368

46. Hongwei Sun, Inhan Kim , "APPLYING AI TECHNOLOGY TO RECOGNIZE BIM OBJECTS AND VISIBLE PROPERTIES FOR ACHIEVING AUTOMATED CODE COMPLIANCE CHECKING" Journal of Civil Engineering and Management, Vilnius Gediminas Technical University, SCIE Vol 28, No 6, pp.497-508


2021

45. In W. Pak, Inhan Kim, Jungsik Choi, "Proposal of the Energy Consumption Analysis Process for the Residential Houses using Big Data Analytsics Technique" Journal of Computational Design and Engineering, Oxford University Press, vol 8(6), pp.1591–1604

44. Ngarambe, Jack,  Inhan Kim, , Geun Young Yun, " Influences of Spectral Power Distribution on", 

SUSTAINABILITY, MDPI, SCIE Vol.13, No.9 (SCIE)


43. Min Jee Nikki Han, Mi Jeong Kim, In Han Kim, "Exploring the user performance of Korean women in smart homes with a focus on user adoption", Journal of Building Engineering, Elsevier, vol 39(102303), pp.1-12 (SCIE)


42. Bonsang Koo, Raekyu Jung, Youngsu Yu, Inhan Kim, "A geometric deep learning approach for checkingelement-to-entity mappings in infrastructure buildinginformation models", Journal of Computational Design and Engineering, Oxford University Press, vol 8(1), pp.239-250 (SCIE)

2020

41. Mi Jeong Kim, Xiangyu Wang, Inhan Kim, " Editorial: Towards Users’ Optimaland Pleasurable Experience in SmartEnvironments" , Frontiers Media, Frontiers in Psychology, vol.11(583663), pp.1-3 (SSCI)


40. Jack Ngarambe, Jacques Nganyiyimana, Inhan Kim, Mat Santamouris, Geun Young Yun, "Synergies between urban heat island and heat waves in Seoul: The role of wind speed and land use characteristics", PloS one, NLM, vol.15(12), pp.1-20 (SCIE)


39. Inhan Kim, Jungsik Choi, Evelyn Ai Lin TEO, Hongwei SUN, "DEVELOPMENT OF KBIM E-SUBMISSION PROTOTYPICAL SYSTEM FOR THE OPENBIM-BASEDBUILDING PERMIT FRAMEWORK", Journal of Civil Engineering and Management, Vilnius Gediminas Technical University, vol.26(8), pp.744-756, (SCIE)


38. Jungsik Choi, Sejin Lee, Inhan Kim "Development of Quality Control Requirements for improving the Quality of Architectural Design Based on BIM", Applied Sciences MDPI, vol. pp.1-25 (SCIE)


37. Antwi-Afari Maxwell Fordjour, Li Heng*, Anwer Shahnawaz, Yevu Sitsofe Kwame, Wu Zezhou, Antwi-Afari Prince, Kim Inhan, “Quantifying workers' gait patterns to identify safety hazards in construction using a wearable insole pressure system”, SAFETY SCIENCE, ELSEVIER,vol.129 (SCIE)

36. Inhan kim, Yongha Lee, Choong-Hee Han, Gutaek kim, Jungsik Choi, “Validation of Support for Creation of License Drawings Using Application for openBIM-Based Automatic Generation of 2D Drawings" Applied Sciences MDPI  vol.10(0), pp.1-17 (SCIE)


35. EunJung Kim, Inhan Kim, Mi Jeong Kim, “The Impact of Workplace Disability Facilities on Job Retention Wishes among People with Physical Disabilities in South Korea”, Sustainability MDPI, vol.12(0) ,pp.1-13 (SCIE)


34. Juan Jin, Kyung-Eun Hwang, Inhan Kim, "A Study on the Constructivism Learning Method for BIM/IPD Collaboration Education", Applied Sciences,vol.10(15), (SCIE)


33. Yongha Lee, Inhan Kim, Jungsik Choi, "Development of BIM-based Risk Rating Estimation Automation and a Design-for-Safety Review System", Applied Sciences, MDPI (SCIE)


32. Jaeyeol Song, Jin-Kook Lee, Jungsik Choi, Inhan Kim, “Deep learning-based extraction of predicateargument structure (PAS) in building design rule sentences”, JCDE(Journal of Computational Design and Engineering), vol.7(0) pp.1-14 (SCIE)


31.Jun Kwon Hwang, Patrick Nzivugira Duhirwe, Geun Young Yun, Sukho Lee, Hyeongjoon Seo, Inhan Kim, Mat Santamouris, “A Novel Hybrid Deep Neural Network Model to Predict the Refrigerant Charge Amount of Heat Pumps”  Sustainability , vol.12(7),  pp.1-23 (SCIE)

30. Inhan Kim, Yongha Lee, Jungsik Choi, "BIM-based Hazard Recognition and Evaluation Methodology for Automating Construction Site Risk Assessment", Applied Sciences MDPI, vol.10(7) (SCIE)

2019

29. Simhee Hong, Seulki Lee, Inhan Kim, Jungho Yu, "Acceptance Model for Mobile Building Information Modeling (BIM)", Applied Sciences MDPI AG, 9(2019) , Vol 9(18), pp.9-19  (SCIE)


28. Jungsik Choi, Inhan Kim, Jihye Shin, “Development of Automated BIM Data Quality Pre-Check(BDQPC) System in Architectural Design Phase”International Journal of Engineering&Technology, Science Publishing Corporation Publisher of International Academic Journals,Vol 8(2),  pp.492-499 (SCIE)

2017

27. Jungsik Choi, Inhan Kim, “Development of Rule-based Building Code Compliance Checking System for BIM-based Quality Improvement”, Information – An International Interdisciplinary Journal, 2017 INTERNATIONAL INFORMATION INSTITUTE,Vol.20(4),  pp.2929-2936 (SCOPUS)


26. Jungsik Choi, Inhan Kim, Jongyeon Bae, “Suggestion and Application of an IFC-based Predefined Specification for Improving Interoperability of the Building Code Checking System”, International Journal of u- and e- Service, SERSC Australia,Vol.10(8),  pp.99-110 (SCOPUS)


25. Jaeho Cho, Jaeyoul Chun, Inhan Kim, Jungsik Choi, “Preference Evaluation System for Construction Products Using QFD-TOPSIS Logic by Considering Trade-off Technical Characteristics”, Mathematical Problems in Engineering, Hindawi Publishing Corporation, pp.1-15 (SCIE)


24. GeunYoung Yun, Je Hyeon Lee, Inhan Kim, “Dynamic Target High Pressure Control of a VRF System for Heating Energy Savings”, Applied Thermal Engineering, ELSEVIER,Vol.113(0),  pp.1386–1395 (SCIE)

2016

23. Jungsik Choi, Jihye Shin, Minchan Kim, Inhan Kim, “Development of OpenBIM-based Energy Analysis Software to Improve the Interoperability of Energy Performance Assessment”, Automation in Construction, ELSEVIER, vol.72(2016), pp.52-64 (SCIE)


22. Hyunsoo Lee, Jinkook Lee, Seokyung Park, Inhan Kim, "Translating Building Legislation into a Computer-Executable Format for Evaluating Building Permit Requirments", Automation in Construction, ELSEVIER,Vol. 71(2016), pp.49-61 (SCIE)


21. Hyunjoo Kim, Zhenhua Shen, Inhan Kim, Karam Kim, Annette Stumpf, Jungho Yu, "BIM IFC Information Mapping to Building Energy Analysis (BEA) Model with Manially Extended Material Information", Automation in Construction, ELSEVIER,Vol.68(0),  pp.183-193 (SCIE)

2015

20. Seunghwa Park, Inhan Kim, "BIM-based Quality Control for Safety Issues in the Design and Construction Phases", International Journal of Architectural Research, Vol9.(3), pp.111-129 (SCIE)


19. Jaeho Cho, Jaeyoul Chun, Inhan Kim, Jungsik Choi, "QFD Based Benchmarking Logic Using TOPSIS and Suitability Index", Mathematical Problems in Engineering,Vol.(2015),  pp.1-13 (SCIE)


18. Kweonhyoung Lee, Inhan Kim, Seungyeon Choo, "Model Study of Design Components for Energy-performance-based Architectural Design Using BIM LOD 100", Journal of Green Building,Vol10(2),  pp.179-197 (A&HCI)


17. Jungsik Choi, Inhan Kim, "Development of an Open BIM-based Legality System for Building Administration Permission Services", Journal of Asian Architecture and Building Engineering, Vol14(3),  pp.577-584 (SCIE)


16. Jungsik Choi, Hansaem Kim, Inhan Kim, "Open BIM-based Quantity Take-off System for Schematic Estimation of Building Frame in Early Design Stage", Journal of Computational Design and Engineering,Vol.2(0),  pp.16-25 (SCIE)

2014

15. Jungsik Choi, Junho Choi, Inhan Kim, "Development of BIM-based Evacuation Regulation Checking System for High-rise and Complex Buildings", Automation in Construction, ELSEVIER,Vol.46,(0),  pp.38–49 (SCIE)


14. Kiuhn Ahn, Youngjin Kim, Cheolsoo Park, Inhan Kim, Keonho Lee, "BIM Interface for Full Vs. Semi-automated Building Energy Simulation", Energy and Buildings, ELSEVIER, Vol.68(2),  pp. 671–678 (SCIE)

2013

13. Inhan Kim, Jongcheol Seo, Insung Kim, "The Role of Construction IT in the Paradigm of Sustainable Architenture", International Journal of Sustainable Building Technology and Urban development,Vol.4(1),  pp.17-21 (SCOPUS)

2012

12. Inhan Kim, Jieun Kim, Jongcheol Seo, "Development of an IFC-based IDF Converter for Supporting Energy Performance Assessment in the Early Design Phase", Journal of Asian Architecture and Building Engineering, Vol.11(2),  pp.313-320 (SCIE)

2010

11. Byeongho Lee, Geonwon Lee, Inhan Kim, Seunghwa Park, Sungwoo Shin, and Youngho Yeo, “Integrated Assessment System of Sustainable Communities using BIM Technology”, SUSB,International Journal of Sustainble Building Technology and urban Development 2010, Singapore, 2093(2010), pp.64~73

2009

10. Jongcheol Seo, Inhan Kim, “Industry Foundation Classes-Based Approach for Managing and Using the Design Model and Planning Information in the Architectural Design”, Journal of Asian architecture and building engineering, Architectural Institute of Japan, 8(2009),Vol.8(2),  pp.431~438 (SCIE)


9. Inhan Kim, "BIM, What Does It Mean for Contemporary Architecture", Space Special Issue BIM, pp. 42-47

2008

 8. Jungsik Choi, Inhan Kim, “An Approach to Share Architectural Drawing Information and Document Information for Automated Code Checking System”, Tsinghua Science and Technology, 13(2008),Vol.13(1),  pp.171~178 (SCOPUS)


7. Inhan Kim, Jongcheol Seo, “Development of IFC Modeling Extension for Supporting Drawing Information  Exchange in the Model-Based Construction Environment”, Journal of Computing in Civil Engineering, ASCE, 22(2008),Vol.22(3), pp.159~169(SCIE)

2005

6. Inhan Kim, Sun Jung Lee, “Development of an Interoperability Model for Different Construction Drawing Standards Based on ISO 10303 STEP”, Journal of Automation in Construction, Elsevier Publisher, Vol.14(5), pp.633~649 (SCIE) 

2003

5. Sang Bong Yoo, Inhan Kim, “Application of Active Real-time Objects and Rules in Semantic Web”, DATABASES IN NETWORKED INFORMATION SYSTEMS PROCEEDINGS, SPRINGER-VERLAG BERLIN, 2822(2003), pp.255-269 (SCIE)



4..Kim I, Liebich T, Kim S-S, “Development of a Two Dimensional model space extension for IAI/IFC2.X2nd model”, Electronic Journal of Information Technology in Construction, 8(2003), pp.219~230 (SCOPUS)

1999

3. Inhan Kim, Thomas Liebich, "A Data Modeling Framework and Mapping Mechanism to Incorporate Conventional CAD Systems Into an Integrated Design Environment", International Journal of Construction Information Technology, Reprographic Unit, University of Salford, pp.17-33

1997

2. Inhan Kim, Thomas Liebich, Tom Maver, "Managing Design Data in an Integrated CAD Environment: A Product Model Approach", Journal of Automation in Construction, Elsevier publisher, pp.35-53

1995

1. Inhan Kim, Thomas Liebich, Tom Maver, "Representation and Management of Design Information in an Integrated Environment in Architecture", An international Yugoslav Journal of Operations Research, Nov, YU, pp.233-257